MV-LE200-120W24-4TD

MV-LE200-120W24-4TD

Supports different control modes of light source, including control panel and software.
Supports using serial port or network interface to set parameters and manage the devic
Provides multichannel inputs and outputs.
Supports installation via slide rail or screw hole.
Supports overcurrent, overload, short circuit protection.
Supports power-oﬀ protection to save configured parameters.

Description

Model	Type	Digital Light Controller，4 channel，120W/24V
Model	Product Model	MV-LE200-120W24-4TD
Performance	Dimming mode	Control panel (via pressing button), software (serial port or network interface)
	Lighting mode	Continued, trigger
	Trigger mode	External trigger and internal trigger
	Applicable product	Ring lighting, bar lighting, flat lighting, coaxial lighting, etc.
	Brightness level	0 to 255
	PWM frequency	125 kHz
	Channel	4-channel
	Drive mode	Digital, constant voltage
	Communication protocol	UDP, Serial
	Lighting response time	< 10 μs
	Flash output	Not supported
Electrical feature	Trigger out	High level 10 VDC to 24 VDC, low level 0 VDC to 2 VDC
	Output current	Max. 5 A
	Output current for each channel	Max. 3 A
	Input current	2.1 A (115 VAC), 1.2 A (230 VAC)
	Output power	Max. 120 W
	Trigger in	High level 4.5 VDC to 24 VDC, low level 0 VDC to 2 VDC
	Output voltage	24 VDC
	Input voltage	100 VAC to 240 VAC, 50 Hz/60 Hz
Mechanical	Lighting output connector	SMR-03V-BC
	Humidity	20% to 85% RH, non-condensing
	Cooling mode	Fan cooling
	Weight	Approx. 732.7 g (1.6 lb.)
	Digital I/O	Opto-isolated input × 4 Opto-isolated output × 4
	Dimension	130 mm × 83.8 mm × 169.5 mm (5.1″ × 3.3″ × 6.7″)
	Power supply interface	C13 220 VAC interface
	Temperature	Working temperature: 0 °C to 40 °C (32 °F to 104 °F) Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F)
	Ingress protection	IP30
	Shell material	Plastic
	Console interface	RJ45 network interface, DB9F serial port
General	Certification	CE, FCC, CCC, KC