MV-LE200-48W24-2D

MV-LE200-48W24-2D

Supports different control modes of light source, including control panel and software.
Supports using serial port or network interface to set parameters and manage the devic
Provides multichannel inputs and outputs.
Supports installation via slide rail or screw hole.
Supports overcurrent, overload, short circuit protection.
Supports power-oﬀ protection to save configured parameters.

Description

Model	Product Model	MV-LE200-48W24-2D
Model	Type	Digital Light Controller，2 channel，48W/24V
Performance	Trigger mode	External trigger and internal trigger
	Applicable product	Ring lighting, bar lighting, flat lighting, coaxial lighting, etc.
	Brightness level	0 to 255
	PWM frequency	125 kHz
	Channel	2-channel
	Drive mode	Digital, constant voltage
	Communication protocol	Serial
	Lighting response time	< 10 μs
	Flash output	Not supported
	Dimming mode	Control panel (via pressing button), software (serial port)
	Lighting mode	Continued, trigger
Electrical feature	Output power	Max. 48 W
	Trigger in	High level 4.5 VDC to 24 VDC, low level 0 VDC to 2 VDC
	Output voltage	24 VDC
	Input voltage	24 VDC
	Trigger out	High level 10 VDC to 24 VDC, low level 0 VDC to 2 VDC
	Output current	Max. 2A
	Output current for each channel	Max. 2A
	Input current	2.5 A
Mechanical	Weight	Approx. 187.2 g (0.4 lb.)
	Digital I/O	Opto-isolated input × 2 Opto-isolated output × 2
	Dimension	90 mm × 54.1 mm × 139.5 mm (3.5″ × 2.1″ × 5.5″)
	Power supply interface	5.08 mm × 2 terminal block
	Temperature	Working temperature: 0 °C to 40 °C (32 °F to 104 °F) Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F)
	Ingress protection	IP30
	Shell material	Plastic
	Console interface	DB9F serial port
	Lighting output connector	SMR-03V-BC
	Humidity	20% to 85% RH, non-condensing
	Cooling mode	Natural cooling
General	Certification	CE, FCC, KC